Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Heat\s+Shields\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Heat\s+Shields\s*$/: 12 ]

Total 12 documents matching your query.

1. [Healeys] Heat Shields (score: 1): Author: 050.rpl at gmail.com (R. Lindsay); Date: Sat, 4 Mar 2017 12:24:51 -0500; I recall someone mentioning that Roger Moment developed a finish to apply to hardi board to make the finish like the original asbestos. I?ve looked through the archives and on John Simm?s site and ca; /html/fot/2017-03/msg00154.html (8,153 bytes)
2. [Healeys] Heat Shields (score: 1): Author: llennep at verizon.net (llennep at verizon.net); Date: Sat, 04 Mar 2017 12:51:38 -0600 (CST); In 2000 or so I found material like the orig stuff. It came from a local boiler supply house. Looked exactly like the orig. I merely cut it and covered it with a few coats of a clear coat, not sure o; /html/fot/2017-03/msg00155.html (8,653 bytes)
3. [Healeys] Heat Shields (score: 1): Author: sentenac.rw at gmail.com (sentenac.rw at gmail.com); Date: Sat, 04 Mar 2017 10:58:47 -0800; It is a two-part refinishing process. First part is two coats of Rustoleum Clean Metal Primer 7780830. Then you apply a very light coat of MinWax Polyurethane Clear Satin to seal the surface and make; /html/fot/2017-03/msg00156.html (9,134 bytes)
4. [Healeys] Heat Shields (score: 1): Author: 050.rpl at gmail.com (R. Lindsay); Date: Sat, 4 Mar 2017 14:01:44 -0500; Thank you Roland. Price Lindsay Cell: 630-841-6300 Email: 050.rpl at gmail.com Sent from my iPhone; /html/fot/2017-03/msg00157.html (9,647 bytes)
5. [Healeys] Heat Shields (score: 1): Author: jmsdarch at sbcglobal.net (John Spaur); Date: Sat, 4 Mar 2017 11:32:18 -0800; White high temperature paint. John Spaur 62? BT7 From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of R. Lindsay Sent: Saturday, March 4, 2017 9:25 AM To: Healey List <healeys at aut; /html/fot/2017-03/msg00158.html (8,827 bytes)
6. [Healeys] Heat Shields (score: 1): Author: ahbn6 at verizon.net (John Sims); Date: Sat, 04 Mar 2017 16:13:30 -0500; Look at: <http://healey6.com/replacement_parts.htm> http://healey6.com/replacement_parts.htm It is called hardie board and can be found at Home Depot. Basically it is the waterproof cement impregnate; /html/fot/2017-03/msg00161.html (9,185 bytes)
7. [Healeys] Heat Shields (score: 1): Author: llennep at verizon.net (llennep at verizon.net); Date: Sat, 04 Mar 2017 19:11:34 -0600 (CST); Did not mention it but the stuff I refer to had the same "grid" pattern in it like would appear if it were dried on a wire rack. In 2000 or so I found material like the orig stuff. It came from a loc; /html/fot/2017-03/msg00163.html (9,126 bytes)
8. [Healeys] Heat Shields (score: 1): Author: YNOTINK at msn.com (WILLIAM B LAWRENCE); Date: Sun, 5 Mar 2017 02:31:52 +0000; Instead of the portland cement waterproof wall board called Hardiebacker it is their thinner soffit material. Bill Lawrence BN1 #554 Look at: http://healey6.com/replacement_parts.htm It is called har; /html/fot/2017-03/msg00164.html (9,576 bytes)
9. [Healeys] Heat Shields (score: 1): Author: healeybruce at roadrunner.com (Bruce Steele); Date: Sun, 5 Mar 2017 07:28:44 -0800; I just installed the Moss kit a couple of weeks ago. Here are a couple of in-progress shots of what they look like finished as described. The kit works very well. Bruce Steele Brea, CA 1960 BN7 --Ori; /html/fot/2017-03/msg00166.html (10,941 bytes)
10. [Healeys] Heat Shields (score: 1): Author: healeybruce at roadrunner.com (Bruce Steele); Date: Sun, 5 Mar 2017 07:32:50 -0800; Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to cut the cement board oneself. I know I could not have done nearly as precise a job with a sabre saw and drill. Plus, my old; /html/fot/2017-03/msg00167.html (10,926 bytes)
11. [Healeys] Heat Shields (score: 1): Author: sentenac.rw at gmail.com (sentenac.rw at gmail.com); Date: Sun, 05 Mar 2017 16:02:27 -0800; I'll second Bruce's comment. The Moss kit comes with the parts pre cut so that they will fit against each other as they should. They specially made thick washers would take effort to dublicate. If yo; /html/fot/2017-03/msg00169.html (9,567 bytes)
12. [Healeys] Heat Shields (score: 1): Author: sentenac.rw at gmail.com (sentenac.rw at gmail.com); Date: Tue, 07 Mar 2017 21:21:09 -0800; BCS is my go to supplier for hard to find parts and parts where quality is an issue. In this case, Moss worked hard to come up with a kit that Roger Moment would approve. The only place that BCS can; /html/fot/2017-03/msg00203.html (8,820 bytes)

Current List: 1 - 12
Page: [1]