- 1. [Healeys] Rear axle Shims (score: 1)
- Author: john spaur <jmsdarch@sbcglobal.net>
- Date: Sun, 09 Jan 2011 19:27:53 -0800
- I should have been more clear. I am looking for the rear axle shims at the axle bearing. Moss did not list them and I did not see them in the BCS catalog either but I can call them Monday. Sorry of t
- /html/healeys/2011-01/msg00157.html (6,359 bytes)
- 2. Re: [Healeys] Rear axle Shims (score: 1)
- Author: richard mayor <mayorrichard@hotmail.com>
- Date: Thu, 13 Jan 2011 02:00:26 +0000
- By "axle bearing", I assume you are referring the bearings in the rear hubs instead of the bearings in the differential. In any case, there is no such thing as an axle bearing. The rear axle "shaft"
- /html/healeys/2011-01/msg00195.html (8,870 bytes)
- 3. Re: [Healeys] Rear axle Shims (score: 1)
- Author: john spaur <jmsdarch@sbcglobal.net>
- Date: Wed, 12 Jan 2011 21:57:32 -0800
- Hi Richard, I was in a hurry when I chose my words. It was the rear hub bearing shim that I was interested in. The shop manual states that the outer face of the bearing spacer should protrude by .001
- /html/healeys/2011-01/msg00205.html (7,924 bytes)
- 4. Re: [Healeys] Rear axle Shims (score: 1)
- Author: "BJ8 Healeys" <sbyers@ec.rr.com>
- Date: Thu, 13 Jan 2011 07:17:28 -0500
- It has been a while since I did the rear axle bearing replacement, but as I recall I used a two or three 0.004" front wheel bearing shims placed around the rear axle flange while pressing in the bear
- /html/healeys/2011-01/msg00207.html (8,341 bytes)
- 5. Re: [Healeys] Rear axle Shims (score: 1)
- Author: warthodson@aol.com
- Date: Thu, 13 Jan 2011 09:57:55 -0500
- If your experience is like mine, you may find that the paper gaskets available today (regardless of the source) are too thick to leave the spacer proud of the hub face. The gaskets I received were Ap
- /html/healeys/2011-01/msg00209.html (9,245 bytes)
This search system is powered by
Namazu