- 1. [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: Henry Morrison <dos_gusanos@msn.com>
- Date: Tue, 19 Apr 2011 22:19:22 -0600
- Is there supposed to be a spacer between the carburetor and the intake manifold on the 100M? Sure seems like there should be one. Thanks in advance. Henry Morrison, Albuquerque, NM __________________
- /html/healeys/2011-04/msg00457.html (7,101 bytes)
- 2. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: <Josef.Eckert@t-systems.com>
- Date: Wed, 20 Apr 2011 08:16:45 +0200
- On 100M Carburetors there is only a paper gasket between the carburetor and the intake manifold. That`s one reason why they are prone to overheating the carbs (at short stops, congestions, filling s
- /html/healeys/2011-04/msg00459.html (7,782 bytes)
- 3. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Wed, 20 Apr 2011 14:55:15 +0800
- Henry - If you don't use the cold air box, you can put a 1/8" to 1/4" phenolic spacer in there... the vapour Im http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com ____________________
- /html/healeys/2011-04/msg00460.html (8,754 bytes)
- 4. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: Jose Vicente Vargas <jvvmusme@yahoo.com>
- Date: Wed, 20 Apr 2011 06:48:06 -0500
- That means that if you intend to use the cold air box there is no space for the spacers ? Has Henry considered a heath shield ? Jose Sent from my iPad and [mailto:healeys-bounces@autox.team.net] http
- /html/healeys/2011-04/msg00464.html (10,247 bytes)
- 5. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: Henry Morrison <dos_gusanos@msn.com>
- Date: Wed, 20 Apr 2011 06:31:20 -0600
- Good morning group, my concern is the clearance between tht throttle shaft and the heat shield on the exhaust manifold. I guess that is where the "slight factory bend" comes in. I will make the prope
- /html/healeys/2011-04/msg00466.html (11,519 bytes)
- 6. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: "Shop at \" Just Brits \"" <shop@justbrits.com>
- Date: Wed, 20 Apr 2011 09:42:48 -0500
- << I guess that is where the "slight factory bend" comes in. >> "Sounds" reasonable, Henry. << I will make the proper modifications. >> After reading LOTS of books and chatting with DMH & Geoff, I wo
- /html/healeys/2011-04/msg00470.html (7,555 bytes)
- 7. Re: [Healeys] Spacers on 100M Carburetors? (score: 1)
- Author: Jose Vicente Vargas <jvvmusme@yahoo.com>
- Date: Wed, 20 Apr 2011 12:39:01 -0500
- I had to modify dennis welch heat shield including bending, cutting and a few I will send pictures off lst to h. Morrison. If any ones wants them send me an email Jose Sent from my iPad On Apr 20, 20
- /html/healeys/2011-04/msg00478.html (8,900 bytes)
This search system is powered by
Namazu