Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+connecting\s+rod\s+bolts\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+connecting\s+rod\s+bolts\s*$/: 6 ]

Total 6 documents matching your query.

1. [Healeys] connecting rod bolts (score: 1): Author: john spaur <jmsdarch@sbcglobal.net>; Date: Sun, 20 Nov 2011 11:09:20 -0800; I am working on the engine and have realized that the connecting rod bolts might be the original ones. I have read that they can stretch and should be replaced. However, it does not appear that they; /html/healeys/2011-11/msg00304.html (7,408 bytes)
2. Re: [Healeys] connecting rod bolts (score: 1): Author: Chris Masucci <csooch1@aol.com>; Date: Sun, 20 Nov 2011 14:05:21 -0600; Why not have them measured for stretch and taper at your machinist? Bring the conn rods too in case they have to knurl the bolt to get a consistent clamp and big end diameter. Cheers, Chris BJ8...bei; /html/healeys/2011-11/msg00305.html (8,348 bytes)
3. Re: [Healeys] connecting rod bolts (score: 1): Author: I Erbs <eyera3000@gmail.com>; Date: Sun, 20 Nov 2011 12:08:46 -0800; VERY important to have the right bolts,. catastrophic engine failure could result. This is not apart you want to make due with. The cost of the correct bolt is far less than a rebuild. Contact the No; /html/healeys/2011-11/msg00306.html (8,955 bytes)
4. Re: [Healeys] connecting rod bolts (score: 1): Author: john spaur <jmsdarch@sbcglobal.net>; Date: Sun, 20 Nov 2011 12:52:06 -0800; I did not find a spec in the workshop manual; will a machine shop know the specs? Thank you, John BT7 waiting for the engine! _______________________________________________ Healeys@autox.team.net Do; /html/healeys/2011-11/msg00307.html (7,338 bytes)
5. Re: [Healeys] connecting rod bolts (score: 1): Author: "Healey Bruce" <healeybruce@roadrunner.com>; Date: Mon, 21 Nov 2011 08:15:11 -0800; This thread made me recall when I tore my engine down in 2004 because I suspected a bad main bearing from a poor rebuild when the car was restored prior to being purchased by the previous owner. Not; /html/healeys/2011-11/msg00331.html (10,463 bytes)
6. Re: [Healeys] connecting rod bolts (score: 1): Author: David Nock <healeydoc@sbcglobal.net>; Date: Mon, 21 Nov 2011 09:52:59 -0800; Healey's rarely have a problem with rod bolts stretching. If you hold them up at arms length and look at the bottom of the threads you will see if they are stretched. Bolts usually will show a proble; /html/healeys/2011-11/msg00335.html (8,841 bytes)

Current List: 1 - 6
Page: [1]