- 1. [Shop-talk] Hub dust cover removal (score: 1)
- Author: scott.hall.personal at gmail.com (Scott Hall)
- Date: Sun, 8 Apr 2012 16:00:11 -0400
- I bought one of those cheap Harbor Freight trailers. Need to install the wheels. I can't get the dust covers off the hubs to bolt on the wheels. If I clamp onto the covers with channel locks I can sp
- /html/shop-talk/2012-04/msg00014.html (7,876 bytes)
- 2. [Shop-talk] Hub dust cover removal (score: 1)
- Author: scott.hall.personal at gmail.com (Scott)
- Date: Mon, 09 Apr 2012 07:22:11 -0400
- I since I had the wheel off, I ended up using a drift to drive off the cover from the back, through the wheel. When it comes time to do this again, I'll probably just crush them with vice grips and r
- /html/shop-talk/2012-04/msg00015.html (9,083 bytes)
- 3. [Shop-talk] Hub dust cover removal (score: 1)
- Author: eric at megageek.com (eric at megageek.com)
- Date: Mon, 9 Apr 2012 10:13:39 -0400
- Here is my advice, take a large hammer and whack that off. Then, go to the local auto parts and pick up the correct size "bearing buddies" and replace them with the BB. These allow you to grease the
- /html/shop-talk/2012-04/msg00017.html (7,493 bytes)
- 4. [Shop-talk] Hub dust cover removal (score: 1)
- Author: scott.hall.personal at gmail.com (Scott)
- Date: Mon, 09 Apr 2012 10:53:50 -0400
- There's already a grease fitting on the back (inside?) of the hub. Do I need another one on the outboard side? I wouldn't need much of an excuse to get those things gone.
- /html/shop-talk/2012-04/msg00018.html (7,913 bytes)
- 5. [Shop-talk] Hub dust cover removal (score: 1)
- Author: tr3driver at ca.rr.com (Randall)
- Date: Mon, 9 Apr 2012 11:25:59 -0700
- The Bearing Buddies in theory provide another benefit: they have a spring-loaded piston that keeps the grease under slight positive pressure. That way if you get the hub wet (like when launching a b
- /html/shop-talk/2012-04/msg00019.html (7,882 bytes)
This search system is powered by
Namazu