- 1. [Shop-talk] Recoil starter repair? (score: 1)
- Author: Dave C <cavanadd@frontier.com>
- Date: Sun, 04 Aug 2013 18:22:38 -0700
- I need to replace the nylon pull rope on my log splitter. It's an older (probably about 20 years) Briggs, vertical shaft, 5HP with a full plastic shroud over the motor. It looks like the gas tank is
- /html/shop-talk/2013-08/msg00019.html (8,452 bytes)
- 2. Re: [Shop-talk] Recoil starter repair? (score: 1)
- Author: "Karl Vacek" <KVacek@Ameritech.net>
- Date: Sun, 4 Aug 2013 20:33:49 -0500
- The recoil assembly is part of the air shroud - no need to pull the flywheel. It engages the inside of the flywheel nut or a separate ratchet held on by the flywheel nut. Likely four screws and it's
- /html/shop-talk/2013-08/msg00020.html (8,830 bytes)
- 3. Re: [Shop-talk] Recoil starter repair? (score: 1)
- Author: Brian Kemp <bk13@earthlink.net>
- Date: Sun, 04 Aug 2013 20:19:08 -0700
- I had a 2000 Briggs mower and had to replace the string. It was a little smaller than your splitter, but should be similar. In my case, I undid the screws holding the gas tank on and moved it enough
- /html/shop-talk/2013-08/msg00021.html (11,425 bytes)
- 4. Re: [Shop-talk] Recoil starter repair? (score: 1)
- Author: Dave C <cavanadd@frontier.com>
- Date: Sun, 04 Aug 2013 20:54:37 -0700
- Thanks. I got the top cover off without any problems and now I just have to get a new piece of line. Looks like it's going to be a little easier than I thought. ______________________________________
- /html/shop-talk/2013-08/msg00022.html (11,682 bytes)
This search system is powered by
Namazu