- 1. [Shop-talk] test lead connectors (score: 1)
- Author: "John Niolon" <jniolon@att.net>
- Date: Sun, 29 Dec 2013 12:23:42 -0600
- for lack of a better term... that's what I need. Recently in the past I've had to do some testing of equipment and the only access was thru it's connector.... the connector was approx 3/8" wide and 3
- /html/shop-talk/2013-12/msg00093.html (8,894 bytes)
- 2. Re: [Shop-talk] test lead connectors (score: 1)
- Author: Brian Kemp <bk13@earthlink.net>
- Date: Sun, 29 Dec 2013 11:38:41 -0800
- John - You can buy just the pins that go in the connector without the connector body. Typically when making a connector, you connect the wire to the pin then insert it in the connector. A local elect
- /html/shop-talk/2013-12/msg00095.html (12,127 bytes)
- 3. Re: [Shop-talk] test lead connectors (score: 1)
- Author: "Matt" <mbarre@juno.com>
- Date: Sun, 29 Dec 2013 19:47:02 GMT
- John,I have a couple of light duty leads that have a small copper wire hook that allow easy connection to an open wire.I have successfully bent the tip a little to allow 90 degree operation but don't
- /html/shop-talk/2013-12/msg00096.html (9,670 bytes)
This search system is powered by
Namazu