- 1. [TR] Install Wiper Motor Bushings (score: 1)
- Author: "G.D. Huggins" <guy@genfiniti.com>
- Date: Mon, 21 Mar 2011 16:20:36 -0500
- In case there might be any interest, I have a nice set of Carrera front shocks on ebay. P/N 3336 Marty _______________________________________________ Triumphs@autox.team.net Donate: http://www.team.
- /html/triumphs/2011-03/msg00244.html (6,530 bytes)
- 2. Re: [TR] Install Wiper Motor Bushings (score: 1)
- Author: <wbeech@flash.net>
- Date: Mon, 21 Mar 2011 18:06:48 -0600
- Lucas Oil Products had a new racing only=A0motor with claims of being high = zinc forified. http://www.lucasoil.com/products/display_products.sd?iid=3D276&catid=3D21&l= oc=3Dshow&headTitle=3D - Lucas
- /html/triumphs/2011-03/msg00248.html (8,387 bytes)
- 3. [TR] Install Wiper Motor Bushings (score: 1)
- Author: guy at genfiniti.com (G.D. Huggins)
- Date: Mon, 21 Mar 2011 16:20:36 -0500
- All, Any tips for installing the three cylindrical rubber bushings into the wiper motor mount? Their diameter is much larger than the hole, and I'm having a hard time imagining them fitting through.
- /html/triumphs/2011-03/msg00559.html (7,287 bytes)
- 4. [TR] Install Wiper Motor Bushings (score: 1)
- Author: wbeech at flash.net (wbeech at flash.net)
- Date: Mon, 21 Mar 2011 18:06:48 -0600
- WD40 and patience. I think I used a small flat screwdriver that was worn so it would not cut into the rubber to work the grommet-like bushings into place. Bill Bill Beecher '58 TR-3A TS30766L "Tarbab
- /html/triumphs/2011-03/msg00563.html (8,860 bytes)
This search system is powered by
Namazu