- 1. [TR] TR3 Dash Vinyl Installation (score: 1)
- Author: cfmtr3a@verizon.net
- Date: Mon, 13 Jun 2011 11:59:15 -0500 (CDT)
- Route it Left, coil up the excess (not less than 3 inches diameter) tie wrap coil where ever it suits you ... enjoy. -- "Thinking is the hardest work there is. That's why so few people undertake it."
- /html/triumphs/2011-06/msg00223.html (6,616 bytes)
- 2. Re: [TR] TR3 Dash Vinyl Installation (score: 1)
- Author: Dave1massey@cs.com
- Date: Mon, 13 Jun 2011 17:07:38 -0400 (EDT)
- Sorry for the bomb and delay - just catching up after getting digest I'll keep it short. Gasket sealer: use hylomar on just about everything except the head gasket which should use a copper coat. It
- /html/triumphs/2011-06/msg00232.html (7,392 bytes)
- 3. [TR] TR3 Dash Vinyl Installation (score: 1)
- Author: cfmtr3a at verizon.net (cfmtr3a at verizon.net)
- Date: Mon, 13 Jun 2011 11:59:15 -0500 (CDT)
- Ok - how does one stretch and/or notch the dash vinyl on the TR3 to fit the cubby box opening. Ruined the first attempt - it tore beyond the visible area. In my opinion there is no way that it can be
- /html/triumphs/2011-06/msg00748.html (7,317 bytes)
- 4. [TR] TR3 Dash Vinyl Installation (score: 1)
- Author: Dave1massey at cs.com (Dave1massey at cs.com)
- Date: Mon, 13 Jun 2011 17:07:38 -0400 (EDT)
- My vinyl stretched just fine without heat. I cut flutes in the areas that wrap around the backside which helped and I used lots of contact adhesive and clamps. That was pretty straight forward. I'm j
- /html/triumphs/2011-06/msg00757.html (7,729 bytes)
This search system is powered by
Namazu