Michael,
TRy turning the lights on & then open the trunk
lid...see if the light is on...I believe they're made
that way...why??
Todd Bermudez
CD198L
CF25768UO
--- SamuelsMA@aol.com wrote:
> I noticed that my trunk light does not light up when
> the lid is opened. The
> bulb and fuse are fine. I removed the inner panels
> from the trunk and
> figured out how the mechanism works: There is a pin
> switch (plunger) which pops
> out when the lid is opened because pressure from the
> hinge is released. That
> must provide a ground for the circuit. This is a
> purple wire. I found the
> red wire which supplies power to the circuit and it
> has no power according to
> my test light.
>
> Where does that red wire come from, and what is the
> most practical way to
> trace it back to wherever the problem is? The
> Haynes manual doesn't have much
> in this area.
>
> Thanks in advance.
>
> Michael
> '76 Tahiti Blue
Tired of spam? Yahoo! Mail has the best spam protection around
|