6pack
[Top] [All Lists]

Welding clutch fork to cross shaft TR6 TR250

To: 6-Pack <6pack@autox.team.net>, Triumphs@autox.team.net
Subject: Welding clutch fork to cross shaft TR6 TR250
From: Don Malling <dmallin@attglobal.net>
Date: Wed, 07 Sep 2005 23:35:17 -0400
What are the list's thoughts about welding the clutch fork to the cross shaft. 
Will I have to cut 
the shaft to remove/replace the clutch release bearing if I weld it? Seems for 
the cost of a shaft 
and release fork it's an easy and sure way out of the broken pin problem -- 
pulling the transmission 
etc.

Don Malling




<Prev in Thread] Current Thread [Next in Thread>