Hey everyone,
Took a look through the archives and I
think I may have a
first. Recall my posts last week where I had a
leaky carb. Tried a few
things, but ended up taking the carbs off
the car. So today, I removed the
float bowl to get at the problem.
When I went to pry the float loose to test
it, the steel clip that
holds the float came off too yikes! It appears that
the PO, had
glued the steel clip in place.
Here is the picture
http://s111.photobucket.com/albums/n148/romagnim/?action=view¤t=CIMG104
8.jpg
So it looks like my choices are to 1)
throw out that carb and replace
it with another or can I glue
that clip back in place? I was thinking of
using JB Weld to glue it
back.
Thoughts and thanks in advance?
Marty
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|