Thanks All,
Appreciate the quick response.
Mark Bullard
'74 TR6
Kailua, HI
----- Original Message -----
From: "Michael Porter" <mdporter@dfn.com>
To: "Mark" <mbullard@hawaii.rr.com>
Sent: Sunday, November 02, 2008 4:03 PM
Subject: Re: [6pack] Tranny removal
> Mark wrote:
>> All,
>>
>> I've got the body off the car and am now getting ready to remove
>> everything
>> else from the frame to complete the frame work. My question: Is the
>> tranny
>> completely sealed so when it is disengaged from the motor, it won't leak
>> oil?
>> I plan on putting it in the corner for a while and don't want tranny oil
>> all
>> over the garage floor.
>>
>>
>
> Technically, yes, it will hold oil if left upright (in the position it's
> in when installed in the car). Left on its side, it will probably leak
> some oil from the shifter rod area.
>
>
> Do the sensible thing and lay down a couple of layers of cardboard and
> place it those. That should take care of the minimal leakage that will
> occur. After all, it leaked in the car, right? :)
>
>
> Cheers.
>
> --
>
>
> Michael Porter
> Roswell, NM
>
>
> Never let anyone drive you crazy when you know it's within walking
> distance....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|