That did it. Thanks Stan.
Mark Bullard
'74 TR6
Kailua, HI
----- Original Message -----
From: "Foster, Stan" <stan.foster@hp.com>
To: "Mark" <mbullard@hawaii.rr.com>; "6pack List" <6pack@autox.team.net>
Sent: Saturday, November 08, 2008 3:31 PM
Subject: RE: [6pack] Differential
Mark, if all of the nuts are removed the only thing holding the diff up is
corrosion and inertia. Try supporting the diff with a floor jack to take the
weight off the donuts and tap the washers from below to break the bond and
then see if you can lease them off. The diff is heavy, dont let it drop to
the floor or on you.
Stan
Sent from my Windows Mobile. phone.
-----Original Message-----
From: Mark <mbullard@hawaii.rr.com>
Sent: Saturday, November 08, 2008 7:31 PM
To: 6pack List <6pack@autox.team.net>
Subject: [6pack] Differential
Aloha All,
Well I removed the tranny on Thursday and have been working my way back to
the
rear end this weekend. I am having a heck of a time removing the diff. I've
got all the bolts removed but the large washers in the rear won't come off.
They seem to be almost welded to the bolt. Any ideas on what I need to do
to
lower this thing?
Thanks,
Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|