Bob, I would imagine once the stuff sets up its effectiveness will be reduced
or removed if you later create movement in the interface that breaks the bond
between the mating surfaces.
What fasteners that typically need re-torquing would you use thread locker on
?
Stan
-----Original Message-----
From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net] On
Behalf Of Bob Danielson
Sent: Saturday, February 28, 2009 8:40 AM
To: triumphs@autox.team.net; 'TR6'
Subject: [6pack] Red Lock-Tite
The red product made by Lock-Tite and Permatex is for heavy duty thread
locking. Sometimes after toquing a component, you're supposed to check &
re-torque after driving XXX miles. I'd usually do that by putting my torque
wrench on the car and tightening it again. If it has loosened and moves,
does that wreck the effectiveness of the thread locking compound?
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|