Ken,
My experience has been that it is a contact problem between the fuse and the
fuse holders in the fuse block. Clean the connections in the fuse block and
wiggle the fuse around when installed and see if they work. Also might check
the spade terminals on the outside of the fuse block. Years of corrosion will
take it's toll and connections won't be all they are cracked up to be.
Bill
'70 6
----- Original Message -----
From: Ken <k_nachman@comcast.net>
Date: Friday, July 10, 2009 5:29 pm
Subject: [6pack] TR6 Lighting issue - Advice Needed
To: 6pack@autox.team.net
> All - last night after leaving our local Triumph club meeting, I
> turned the
> lights on my TR6 and left. The headlights worked, but I had no
> gauge lights.
> When I got home I realized that I also didn't have any
> taillights or parking
> lights. In checking Dan Master's book it seems these are all on
> one fused
> circuit. I put in new Lucas fuses and still have no
> working lights. Dan
> Master's book really doesn't say much about losing all these
> lights. It
> mainly concentrates on other areas, but in looking at the wiring
> diagram it
> looks like the front parking lights get power BEFORE the
> switches and they
> don't work either. I checked at the fuses and it seems like
> there is no
> power to the fuse?? Anyone have any ideas?
>
>
>
> Thank
Ken
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|