6pack
[Top] [All Lists]

Re: [6pack] vacuum leaks

To: <6pack@autox.team.net>
Subject: Re: [6pack] vacuum leaks
From: Cris Hemingway <cris_tr6@hotmail.com>
Date: Sat, 8 May 2010 09:18:04 -0700
If you have Stromberg carbs, the symptoms described can be caused by a
stuck/dirty temperature compensator on either carb.  These can be cleaned and
re-set, and there is techincal information available on how to do it.  Not
sure where I picked it up though, either Moss Motors or the Triumph Registry
website (VTR?) some time ago.







Cris Hemingway




> From: vance.navarrette@intel.com
> To: mhooper@digiscreen.ca; sumton@sbcglobal.net; 6pack@autox.team.net
> Date: Fri, 7 May 2010 13:47:47 -0700
> Subject: Re: [6pack] vacuum leaks
>
> Mark:
>
> Oooo, very astute. Wish I thought of that one. Yes, the vacuum retard might
> be on its way out, and could indeed cause an unsteady idle. To test this
idea
> disconnect the vacuum line to the dizzy and cap it. The idle should be
steady
> and fast with the vacuum line plugged. The retard drops the idle by about
400
> RPM when functioning, if I remember correctly.
> BTW, the later vacuum retard is NLA from the big three, last time I
checked.
> However the earlier vacuum retard was still available. If you do need a
later
> vacuum retard capsule, you can order the earlier one, and hacksaw the
threaded
> rod off of the unit. Other than the presence of the threaded rod, the old
and
> new retard capsules are identical, so cutting the rod off the earlier one
> gives you a drop in replacement for the later style. Ask me how I know.
>

>

_________________________________________________________________
Win a $10,000 shopping spree from Hotmail! Enter now.
http://go.microsoft.com/?linkid=9729711
_______________________________________________

6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>