On Thursday, May 27, 2010 09:14:26 pm Richard Lambour wrote:
> Hi,
>
>
>
> I've been looking for replacement brake piping/lines for my 1970 TR-6 which
> is a frame off restoration right now. I have a couple of questions:
>
>
>
> 1. My car is left hand drive (US) but does not appear to have been
> fitted with a PDWA switch - we can't find any of the hardware on the car.
> Is this something that would not have appeared on the 1970 cars? It
> appears in the Moss and TRF parts lists.
> 2. Is there more than one manufacturer of pre-bent brake lines for the
> TR-6?
>
>
>
> Thanks very much!
>
>
>
>
>
> Rick Lambour
>
> 1970 TR-6
Rick,
Your 70 6 should have a PDWA switch mounted just below the mc. 2 pipes exit
the mc on the left and enter the PDWA switch. 2 pipes exit the PDWA on the
right, one goes to the front brakes and the other to the rear breaks. The
switch is brass with a single push on connector to the brake warning light on
the top.
Bob
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|