6pack
[Top] [All Lists]

Re: [6pack] DUAL WEBER 45 MCHH TRIUMPH CONVERSION KIT

To: "Bill" <anabil007@comcast.net>, <6pack@autox.team.net>
Subject: Re: [6pack] DUAL WEBER 45 MCHH TRIUMPH CONVERSION KIT
From: "Wayne Lee" <wayne@motorcarriage.com>
Date: Fri, 28 May 2010 14:59:44 -0400
Bill wrote:
"I am of the opinion that for normal street  use almost all Triumphs are 
over carbureted."

Yes, This can happen with Weber DCOE's and DellOrto's as well as any other 
fixed Venturi /Choke Carb.
I've used them both on several Cars, Alfas came with the 40's and BMW's 
(2002's) always were prescribed
45's. They were fine for the street but when You overstep that line, it's a 
step backwards unless You have
the rest of the hardware to back them up.

   That's where the beauty of SU's come in to play. With a Constant 
Depression,Constant Velocity or Variable Choke
Carb like an SU it will only take what it needs, the only inefficiency is if 
You're running too rich a Needle and compromise
mileage etc. I have a pair of HS6's on my low compression 75 TR6 with ANSA, 
Pertronix etc. and love them. On my
other Head that I have on the Bench now I'm going to run a pair of SU 2" 
HS8's with 9.25 to 1 C/R, Mild Cam with
Roller Rockers having 1:65 ratio, along with a Header that will work with 
the ANSA dual pipe setup.

  Overkill it might be, but it won't be "Over Carbed"
Cheers,
Wayne Lee
Douglas, MA
64 TR4
69 Spit
75 TR6




--------------------------------------------------
From: "Bill" <anabil007@comcast.net>
Sent: Friday, May 28, 2010 2:18 PM
To: "David Murray" <murr32@shaw.ca>; "'Foster, Stan (HP IT)'" 
<stan.foster@hp.com>; <6pack@autox.team.net>
Subject: [6pack] DUAL WEBER 45 MCHH TRIUMPH CONVERSION KIT

> This may be heresy, but I am of the opinion that for normal street use 
> almost all Triumphs are over carbureted ... At the Monteray Historics one 
> year there was a Factory modified Sebring Sprite ... it had only one 
> downdraft weber, and was faster than snot, in the "race" it participated 
> in it easily out ran all its competitors.  Some one, I think it was Vance, 
> said "keep it simple", which I agree with whole heartily.  In the book 
> "How to repair your foreign car" the chapter on carburetor is sub-titled 
> "carburetor ... a French word for DO NOT TOUCH".  I have found this to be 
> pretty much true, as 99% of my carburetor problems were really ignition. 
> But that is entirely another subject.
>
>
>>My car, stock '73 tested at 75 rwhp while slightly out of tune.  With 
>>mods:
>>lightened flywheel, over bore 0.030", GP2 cam, 10:1 comp, electric fan,
>>5-speed trans (and some I've likely forgotten) tested at 125 rwhp.  So 
>>those
>>numbers are not out of whack.
>>
>>Dave
_______________________________________________

6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>