6pack
[Top] [All Lists]

[6pack] Ignition Timing

To: colinthom@shaw.ca
Subject: [6pack] Ignition Timing
From: Bruce Simms <brucesimms2003@yahoo.ca>
Date: Fri, 24 Sep 2010 09:40:37 -0700 (PDT)
280 degree cam (PI cam specs), 9.5 compression, SUHS6,   Crane XR3000,  91 or
94 
Octane gas,  no anti-run on valve.  Hot lash at 18 as per cam sheet.  
Warm idle 
950-1000.   Gas price not an issue for the amount car is driven. 
Advanced Distributors just re-built and re-curved distributor, recommending 
10-14 degrees BTDC timimg.  I set it at 14.

Engine runs  nicely and pulls
well.  No knocking, pinging or running-on.

Bruce Simms
_______________________________________________

6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>