Unless you changed to a distributor with vacuum advance, you shouldn't
have it on a '75. If you only have the one vacuum module, and it is on
the rearward side (closest to the firewall) then you have a vacuum
retard unit. Advance would all be by centrifugal means. The retard
module could also be worn out and not providing any retard. Not a
totally detrimental loss.
Shawn
On Mon, Oct 4, 2010 at 6:28 PM, Bill Wellbaum <wcwellbaum@cox.net> wrote:
> I've discovered that at 12 Degrees BTDC my '75 runs as well with the vacuum
> advance disconnected as it does connected. We're not talking about high
> speed work, here, just normal driving around town. How could this be?
>
> Bill Wellbaum
> ----- Original Message ----- From: "robert fabie" <bobfabie@gmail.com>
> To: <6pack@autox.team.net>
> Sent: Monday, October 04, 2010 3:25 PM
> Subject: [6pack] Timing Replies - thank you
>
>
>> Friends,
>> Thanks to all who responded to my question about the correct timing. Your
>> collective wisdom is much appreciated. What worked very well for me was to
>> set the idle at 850 and set the timing to 12 degrees before TDC. With my
>> vacuum permanently blocked, the car runs exceptionally well. That whole
>> retard/advance discussion just evaded me for a while. Thanks again.
>> Bob
>> _______________________________________________
>>
>> 6pack@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/wcwellbaum@cox.net
>
> _______________________________________________
>
> 6pack@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/shawn.loseke@gmail.com
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|