Dave,
In addition to what Dick said, you may wish to be prepared to repair any
stripped threads in the aluminum trailing arm. It's not unusual for the
threads to deteriorate from corrosion between the steel fasteners and the
aluminum (aluminium, ahem) arm. Any good auto supply place should be able to
set you up with Keenserts or the equivalent. That's not a hard job, either,
if you can drill a straight hole.
-- Phil Barnes
-- '71 TR6 since 1977
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|