B
I haveB the hub spacer kit from TRF (w/o up rated stub axles).B B The old
bearings
are Timken and in good shape, so will be re-used, even though I have
new bearing
kits from TRF.
B
Okay, drop spacer into hub, installB inner
bearing on race and oil seal on hub.B
Install hub on axle.B NO shim,
B insert outer bearing into hub,B B D washer,
torque castle nut to 50 lbs as
per instructions.B Hub spins okay with no real
movement fore/aft,
up/down.B B B
B
The other side is stockB B for now, no spacer, castle nut
torqued to 10 lbs.B B Bit
tighter than the other side, but good I
believe.B B Car driven last year like
this.
B
I donbt want to go any
looser with hub, so am I okay with NO Shim?
B
I've also emailed Tony Drews on
this.
B
B
Thank you,
B
Bruce Simms
73 TR6
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|