[6pack] Grease gun

[David Friedlander <forzion7@gmail.com>]

Greetings all!

I see on http://www.vtr.org/maintain/trunnion-oil.shtml
that Peter Zaborski uses a Quicksilver Grease Gun (P/N
C-91-37299 and oil is Quicksilver Gear Lube Super Duty
in a 250 ml tube (P/N 92-98780). That's good info for
trunnion oiling.

But, can someone recommend a good quality grease gun
for tie rods, u-joints, ball joints, etc. that is able to reach
grease zerks while lying on ones back on the floor of a
garage?  :- ) The grease gun I have must be a cheapo -- it
leaks and is too large to maneuver where it's needed....

Thanks!

Dave
'74-Six CF25194UO

________________________________________

6pack@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/6pack/mharc@autox.team.net