alpines
[Top] [All Lists]

Subject: Rear Spring Height

To: <alpines@autox.team.net>
Subject: Subject: Rear Spring Height
From: "Steve Graham" <sjgraham@bigpond.com>
Date: Wed, 20 Jun 2001 19:43:07 +1000
Tom wrote:

Date: 15 Jun 2001 16:39:03 -0500
From: Thomas Wiencek <wiencek@anl.gov>
Subject: Rear Spring Height

Does anyone have a new set of Alpine leaf springs (Curt?) or a drawing the
gives the height and other dimensions?  When I go to have my rear springs
rebuilt locally, I want to make sure they do it correctly.  Would they have a
book with these dimensions?  Thank you.

Tom,

I have a pair of leaf springs that I believe were new and unused (they have
all the rubbers including the leaf clamps and shackle rubbers) the distance
from the level floor to the lower edge of the main spring is 187mm. That is
when the spring is placed on the floor in an upright position. Both springs
have the same measurements.

Steve G

VGT-66 (hope to start it this weekend)

<Prev in Thread] Current Thread [Next in Thread>
  • Subject: Rear Spring Height, Steve Graham <=