alpines
[Top] [All Lists]

[Alpines] OD switch in gearbox

To: "'Sunbeam Alpine'" <sunbeam.alpine@swipnet.se>
Subject: [Alpines] OD switch in gearbox
From: Łauri <lehtinen.lauri@kolumbus.fi>
Date: Thu, 3 Sep 2009 17:47:25 +0300
My new OD box came without switch. Is it identical to reverse light
switch? And switch connects only when using 1st and 2nd gears. I tried
to use reverse light switch, but so far it don't work with or without
shims. Circuit diagram is so faint that I can't read it to be 100% sure.

Another problem is windshield, I have glass in frame, but how to get
that rubber sit correctly under frame? Should I put a length of thin
rope into the groove, frame into place and then draw that rubber on the
chrome list?

I must once again try to find it in workshop manual (I think it has only
about glass to frame instructions).

Lauri Lehtinen
journalist, engineer
mobile: +358 (0) 400 851988
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Alpines@autox.team.net
http://autox.team.net/mailman/listinfo/alpines

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Alpines] OD switch in gearbox, Łauri <=