There's a trick with static cling. I guess you gotta create the static.
Bring a squirt bottle of water along.
First, be sure the door is clean. Then, squirt water on the door, put the
number on the wet door, squeegee the number down. It'll stay.
Was having the same problem, using static cling on a door with so much Bondo
magnets wouldn't stick, until I learned the water trick.
--Rocky Entriken
----- Original Message -----
From: "Mike Lowe" <mikelowe93@Houston.rr.com>
To: <autox@autox.team.net>
Sent: Thursday, February 20, 2003 12:34 AM
Subject: Re: Static Cling letters and numbers
> Instead of static cling numbers, you can make a template and cut
contact
> paper as needed. My dad does that with his Corvette. His static cling
> numbers kept blowing off.
>
>
> Mike Lowe
> 94 Mazda Miata Turbo in SM2
> 03 Chrysler PT Turbo on the way
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Partial archives at http://www.team.net/archive
|