Anybody dripped their floor pans from the body?
I have the side walls off and the front and rear pans seperated. I've
finished putting a coat of resin over both sides and some cloth in
places to reinforce the pans & sidewalls where they were broken. Now
I'm ready to start putting the pieces back together.
>From what I can tell, it appears that the floor and side panels are
about 3/16" (.187) and 2/16" (.130) respectively. So my initial
thickness is around 5/16". But I don't know how much length the pop
rivets need to extend beyond the 2 layers to get a good bite.
It also looks like the original rivets were about 7/32" (.210") in dia.
What size pop rivets did you use to put the stuff back together?
Did you use steel or AL?
TIA
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 65 Morgan 4/4 Series V (B1109)
71 Saab Sonett III (71500840) 75 Bricklin SV1 (0887) 77 Spitfire
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
|