Mine has no markings and has a tight preformed almost
180deg bend at the pump end. It seems to me a longer
straight piece could be looped around the high
pressure hose and dipstick in a sweeping curve back
to the pump.
GM
----- Original Message -----
> On the 75s (which use a different PS pump than
the 74s) has anyone replaced
> their resivor to pump hose? I'm looking for a part
number or info on it.
> It is relatively large in dia. Is it pre-bent, or
have you been able to
> bend some generic hose?
>
> John
|