At 04:59 PM 6/1/2009, cutright@eoni.com wrote:
>Hi Guys, I am working on hooking up the doors and cylinders etc on 1349. I
>found that the plates that the door bolts go into on the drivers
side have been
>enlarged re taped and 4 of them are stripped out already. On the passengers
>side it has the original bolt size and 2 of them are stripped out.
Is there a place
>that I can get new plates to put in the doors to replace the ones
that are bad?
Merv,
I assume that you are talking about the mount that the list ram
mounts to, right?
If so are the skins on your doors?
The only thing I can think of is do something like what is done to
the plates that
the hinges mount to, weld nuts to the plate.
I don't know if you can get the plates out of the roof without
cutting either the top
or bottom of the door open and then rewelding it closed.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|