bricklin
[Top] [All Lists]

Re: [Bricklin] Gas cap

To: "'Christopher Blizzard'" <blizzard@0xdeadbeef.com>, "'John T. Blair'" <jblair1948@cox.net>
Subject: Re: [Bricklin] Gas cap
From: "Brett Kelsey" <brett.kelsey@comcast.net>
Date: Wed, 9 Sep 2015 20:17:59 -0400
Cc: Bricklin@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: bricklin@autox.team.net
References: <6.2.5.6.1.20150909152658.05057940@cox.net> <40492F71-C4C3-4543-B501-A5A375499DB7@0xdeadbeef.com>
Thread-index: AdDrTZbfiuu4hOlRRD2LGfJRQwt/XgAEETvA
I've always had a vacuum release when I open the gas cap. I've never had any
vapor lock or other fuel issues. Are we sure the tank is/should vented?

-----Original Message-----
From: Bricklin [mailto:bricklin-bounces@autox.team.net] On Behalf Of
Christopher Blizzard
Sent: Wednesday, September 09, 2015 5:13 PM
To: John T. Blair
Cc: Bricklin@autox.team.net
Subject: Re: [Bricklin] Gas cap

The cap on my 1974 is not vented.  It seals well.  There is a vent, on top
of the fuel tank that runs through a flexible line to a hard line that runs
to the front of the car, showing up just in between the brake booster and
the driver's side tire well.  If you're getting vacuum when removing the cap
it's likely that your vent lines are plugged or the vent on your tank has
rusted.

My car has never had anything in the engine compartment - I suspect there's
supposed to be some kind of charcoal container and that might have a one-way
valve that might cause vacuum, but seems unlikely given that the fuel pump
needs to pull fuel out of the tank and vacuum would be bad.

--Chris

> On Sep 9, 2015, at 12:30 PM, John T. Blair <jblair1948@cox.net> wrote:
>
> Hey gang,
>
> I just got a question about the gas caps.  Are they vented or not?  I 
> don't think they were vented, otherwise they would not have the fume 
> tank and the
return tube for the fumes to the tank.
>
> I went out to look at my car, and I don't have the gas cap on the car.  
> In fact I don't have the ring attached to the panel behind the license 
> plate
holder and I can't find it in my garage right now.  So I figured it would be
> best to get some help on answering this question.
>
> If I remember the cap correctly it was just round with cupped (ridged)
outer
> edge, smooth convex cover and I think some printing stamped into it.
>
> TIA
>
> John
>
> John T. Blair  WA4OHZ     email:  jblair1948@cox.net
> Va. Beach, Va                  Phone:  (757) 495-8229
>
>          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
>     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
>                       65 Rambler Classic
>
> Morgan:    www.team.net/www/morgan
> Bricklin:  www.bricklin.org
>
> If you can read this             - Thank a teacher!
> If you are reading it in English - Thank a Vet!!
>
> From Dennis Prager - The American Trilogy:
>     e pluribus Unum, "from many, one."
>     In God We Trust
>     Liberty - the  power  of  choosing,  thinking,  and  acting  for
>                  oneself; freedom  from  control  or  restriction
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> _______________________________________________
> Bricklin@autox.team.net
> Donate: http://www.team.net/donate.html Suggested annual donation  
> $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/blizzard@0xdeadbeef.com
_______________________________________________
Bricklin@autox.team.net
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/bricklin/brett.kelsey@comcast.net
_______________________________________________
Bricklin@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>