Re: Filling holes...

[Roland Dudley <mit-eddie!dtc.hp.com!cobra@EDDIE.MIT.EDU>]

>From: Darrell Walker <EDDIE.MIT.EDU!mit-eddie!hprpcd.hp.com!walker>

>My current project is to repaint the inside of my LBC....     
>                                           I understand that
>bondo will absorb moisture, not good since the bottom side may
>be unpainted....                                                

There are fillers designed for marine use.  Some hardware stores
carry them but you can also check with a local boat supply place.
They are not as soft as bondo but that shouldn't matter in this
case.