Dean_Zywicki@NIHDCRT.BITNET scribed:
Subject: Diff. filling on '80 MGB
> 1) What do I use to remove the fill plug on the differential for a
> 1980 MGB. I don't seem to have anything that comes close to fitting.
It's about a 7/16 or so square hole- there isn't a "standard tool".
I took a length of ~ 1/2" square rod, ground the end to fit in
the hole, and made a 90 degree bend about an inch or 2 in. Works great.
If what you have doesn't work, make it! That's what grinders,
torches, welders, and other shop tools are for!
Roger "Tools are made to be modified" Garnett
|