Re: Fitting an Overdrive.

[Greg Meboe <meboe@wsuaix.csc.wsu.edu>]

Greg,
        The two splines you see are indeed the Planetary clutch and the 
unidirectional clutch.  You line them up with a long screwdriver by 
turning the unidirectional clutch counterclockwise as you look in.

It's expected that this will need to be done when you disassemble an O/D.

                Greg
                            Greg Meboe     meboe@wsuaix.csc.wsu.edu
                            Dept. of Mechanical and Materials Engineering
                            Washington State University,  Pullman, Wa.
                            '67 Spit-6   '74 TR-6