british-cars
[Top] [All Lists]

Re: Gas filler grommet/seal

To: <TATERRY@aol.com>, <barneymg@MGAguru.com>, <mgs@autox.team.net>,
Subject: Re: Gas filler grommet/seal
From: "Mike Denman" <mikedenman@sbcglobal.net>
Date: Tue, 14 Sep 2004 07:24:39 -0700
Thanks Terry... found what I was looking for in their catalog.
Mike
  ----- Original Message -----
  From: TATERRY@aol.com
  To: barneymg@MGAguru.com ; mikedenman@sbcglobal.net ; mgs@autox.team.net ;
british-cars@autox.team.net ; triumphs@autox.team.net
  Sent: Tuesday, September 14, 2004 6:40 AM
  Subject: Re: Gas filler grommet/seal



  In a message dated 9/13/2004 10:44:55 PM Pacific Standard Time,
barneymg@MGAguru.com writes:



    At 08:17 PM 9/13/04 -0700, Mike Denman wrote:
    >.... looking for a part for an old TVR .... The metal tube that goes
    >between the gas cap and the flexible hose to the gas tank is 2.250" (2
    >1/4") in diameter and I am looking for the lip seal that fits around the
    >filler tube where it goes through the body. .... which of the various
    >British Cars used a 2 1/4 in filler tube. ....

    MGA is 2".  Keep looking.

    Barney Gaylord


  Check out Paul Beck at http://www.vintagecarparts.co.uk/
  He carries a lot of these big grommets.....
  Terry in Oakland






<Prev in Thread] Current Thread [Next in Thread>