buick-rover-v8
[Top] [All Lists]

Torque setting for Rover Spark Plugs?

To: buick-rover-v8@autox.team.net, rro@playground.sun.com
Subject: Torque setting for Rover Spark Plugs?
From: "Stuart Goggin" <SGOGGIN@au.oracle.com>
Date: 12 May 99 09:22:13 +1000
--=_ORCL_17442955_0r0


I know it's probably a stupid question,  but for some stupid reason I cannot
find any information on how tight to tighten a Range Rover v8's spark plugs.
  there must be some torque value or information somewhere.  I have never
had an alloy head engine before so have no idea how tight is right ;-)

I had a weird ticking sound the other day,  it only occured when I took my
foot off the throttle.  Sounded just like a loose spark plug.   But as I
have only just had the thing serviced,  how could a loose plug be possible??
  Well the plug was about half way out of the head!!!!!   I suspect it has
done some damage to the aluminium head threads as they look a little worn.  
So the question is how tight should these plugs be tightened.  And the
second question is how hard should I kick the arse of the mechanic who
installed them.....   Bit peeved about the last service done on it, lots of
irritating things,  like a sump plug done up so tight I had to use a
hydralic jack and a 2ft breaker bar to undo,  The car lifted about 12 inches
before the sump plug moved.  After that I decided to do all the servicing
myself...


Stuart

--=_ORCL_17442955_0r0
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--=_ORCL_17442955_0r0--


<Prev in Thread] Current Thread [Next in Thread>