http://pages.prodigy.net/larryhoy/V8EngineSpecs.htm
> -----Original Message-----
> From: owner-buick-rover-v8@autox.team.net
> [mailto:owner-buick-rover-v8@autox.team.net] On Behalf Of
> Thomas Joyner
> Sent: Wednesday, May 01, 2002 5:27 PM
> To: Buick-Rover V8 List
> Subject: Rover 4.2 crank question
>
>
> All,
>
> As my crazed 4.2 project progresses I find it harder to get
> clear info on what some of the differences are. For instance,
> the main bearing catalog numbers are different between the
> 3.5-3.9 and the 4.2, the big end bearing are the same. What
> gives? What, besides the crank stroke, is different? Any and
> all answers and advice are welcomed!
>
> Tom
> 88 RR
> Durango
///
/// buick-rover-v8@autox.team.net mailing list
///
|