I just put my front suspension back together and used grade 8 bolts
everywhere. I found a commercial hardware company that matched all the
samples I brought in.
A hint I got from others is to use a much longer bolt on the upper arm
mounts so that you can get a lock washer and nut on the back - the stock
setup jut uses a lock washer on the top.
Leigh Brooks
BADROC
on 9/27/02 2:29 PM, Tim Waltz at printner@worldnet.att.net wrote:
> I'll be putting the front suspension back together soon, and wanted to look
> for new bolts for the upper A-arms, ball joint mounts, steering box/idler
> box mounting bolts, etc.
>
> What I was wondering is if these are commercially available (what grade and
> size), and can stainless be used? I didn't know if stainless is strong
> enough, or if I have to use other.
>
> TIA
>
> Tim
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Archives at http://www.team.net/archive
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|