I would use the fill plug as a gauge, just keep on pumping the trans.
oil in until it gets level with the fill plug hole: it can't get any
I have used Penrite Manual Gearbox Oil Light, GL4 rated 80W Gear Oil,
but any good quality gear oil should be OK.
DO NOT use diff oil in the trans. or vice versa.
1965 SP310 - under construction DSOA Member # 112
1971 P510 4 door - daily driver, original owner, highly modified.
1972 PL510 2 door - in storage.
1973 HS30/240Z - re-building to 2003 specs.
Adelaide, South Australia.
[mailto:firstname.lastname@example.org]On Behalf Of Mike
Sent: Tuesday, 11 March 2003 11:33 AM
Subject: tranny fluid
I must not be seeing it but I cannot seem to find the tranny capacity
the 4 speed on an early 67 1600 in my manual. also, what weight should
thx for the help,
/// email@example.com mailing list
/// Archives at http://www.team.net/archive