Not to mention you'd have to drill the existing seat bolts to fit the
push/pop-pins.
There is not enough meat there for comfort -- on either bolt or pin.
Gary McCormick wrote:
> What fastener would the proposed push pins be replacing? If it's the bolts
> securing the seat to the slide or the slide rails to the floor, this wouldn't
> be a good idea (I'm going from a look at the Parts Book microfiche - I haven't
> looked at the seat installation in my car).
>
> Ball-lock pins are designed to be loaded in shear, but they don't secure
> components axially like a cinched-down bolt and nut, and the lateral movement
> that would result from the necessary assembly clearance would be undesirable
> in a seat installation.
>
> Gary McCormick
> San Jose, CA
> b70 2000, SRL311-13291
>
> --- On Thu, 10/8/09, Gordon Glasgow <gsglasgow@comcast.net> wrote:
>
> From: Gordon Glasgow <gsglasgow@comcast.net>
> Subject: Re: [Roadsters] easy seat removal
> To: "'Tim'" <tputland@charter.net>, "'datsun-roadsters: autox.team.net'"
> <datsun-roadsters@autox.team.net>
> Date: Thursday, October 8, 2009, 9:26 AM
>
> I missed that comment, but it might have been referring to using something
> like hood pins. This, however, would definitely NOT be a good idea in real
> life, since those pins aren't designed to take any real load, as might be
> experienced in an accident.
>
> Gordon Glasgow
> -----Original Message-----
> From: datsun-roadsters-bounces@autox.team.net
> [mailto:datsun-roadsters-bounces@autox.team.net] On Behalf Of Tim
> Sent: Thursday, October 08, 2009 8:47 AM
> To: datsun-roadsters: autox.team.net
> Subject: [Roadsters] easy seat removal
>
> Earlier this year someone said something to the effect:
>
> If I had known how many times I would be removing the seats, I would have
> installed push pins (<---???) for easy seat removal.
>
> Does any one remember this, or remember saying this? What was being referred
> to?
>
> Thanks
>
> Looking to speed up and make easier the removal of the seats in my 2000.
>
> Tim
> Dairyland Datsuns
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
> You are subscribed as gkmcc@sbcglobal.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as rwm@rwmann.com
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
>
>
--
R.W. Mann & Company, Inc. >> Airline Industry Analysis
Port Washington, NY 11050 >> tel 516-944-0900, fax -7280
mailto:info@RWMann.com >> URL http://www.RWMann.com/
This e-mail is for the designated recipient only and may contain
privileged or confidential information. If you have received it
in error, please notify the above sender immediately then delete
the original e-mail. Any other use of this e-mail is prohibited.
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|