fot
[Top] [All Lists]

RE: not using engine mounts.

To: fot@autox.team.net
Subject: RE: not using engine mounts.
From: Bill Babcock <BillB@bnj.com>
Date: Mon, 4 Aug 1997 11:43:42 -0700
Yes, slightly, but not much. It's almost even. I'm sure if I ran over
something nasty the chance of bonking a hole in it would greater, but
not much greater.

The biggest problem is that engine vibration is coupled to the frame,
and everything shakes a little more.  

> -----Original Message-----
> From: Dunst, Mordecai [SMTP:mdunst@smtplink.Coh.ORG]
> Sent: Monday, August 04, 1997 11:11 AM
> To:   AlexanderJosephH@Waterloo.deere.com; fot@autox.team.net;
> "'Malaboge@aol.com'"@smtplink.Coh.ORG; Bill Babcock
> Subject:      not using engine mounts.
> 
> 
>      I can see several problems with this concept.  Is the oil pan now
> 
>      below the frame rails?
>      
>      Mordy 
> 
> 
> ______________________________ Reply Separator
> _________________________________
> Subject: RE: TRans mount ramblings...
> Author:  Bill Babcock <BillB@bnj.com> at INTERNET
> Date:    8/4/97 9:32 AM
> 
> 
>      I solved this problem with one rather radical solution. I solid 
>      mounted my engine in the front.  
> I've had no problem with the mounts in the two years since I made 'em.
>      

<Prev in Thread] Current Thread [Next in Thread>