fot
[Top] [All Lists]

Re: Cranks

To: "Tony Dains" <TDAINS@bigpond.com>, <fot@autox.team.net>
Subject: Re: Cranks
From: "R. Kastner" <kaskas@earthlink.net>
Date: Wed, 21 Mar 2001 07:08:37 -0800
Nitriding will improve the crank about 50% but DON'T lighten.

----- Original Message -----
From: "Tony Dains" <TDAINS@bigpond.com>
To: <fot@autox.team.net>
Sent: Tuesday, March 20, 2001 5:35 PM
Subject: Cranks


> Friends
> I am now building a new motor for my TR6 which I hope to be able with the
aid
> of a modified crank to rev to 65 -7000
> I will be nitriding the crank. My question is are there any special
problems
> involved with nitriding Triumph cranks.
> I will be using either a brand new crank or a well used one  Bearings
still at
> -0.010
> Any suggestions?
> Secondly I had thought of lightening the standard but I believe this could
> have the effect of lowering the hormonic point from 6300 to ????
> Has anybody on thoughts on the matter.
>
> Tony

<Prev in Thread] Current Thread [Next in Thread>
  • Cranks, Tony Dains
    • Re: Cranks, R. Kastner <=