fot
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

TR4 & A Head Thickness

from [Catpusher] [Permanent Link][Original]
To: fot@autox.team.net
Subject: TR4 & A Head Thickness
From: Catpusher@aol.com
Date: Fri, 15 Feb 2002 22:06:56 EST 
>From the head gasket surface to the rocker cover gasket surface
the uncut head measures  3.330" on the TR3/4/4A

Hardy
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • TR4 & A Head Thickness, Catpusher <=
Previous by Date:  RE: Cylinder head thickness, Randall Young
Next by Date:  Re: Cylinder head thickness, Greg Solow
Previous by Thread:  Cylinder head thickness, MARY HODGSON &
Next by Thread:  RE: Cylinder head thickness and the PHA, Brad Eells
Indexes:  [Date] [Thread] [Top] [All Lists]