fot
[Top] [All Lists]

Re: Spring Rates

To: john@race-dogs.com
Subject: Re: Spring Rates
From: William G Rosenbach <wgrosenbach@juno.com>
Date: Fri, 9 Jan 2004 00:02:23 -0700
Doesn't the angle of the spring affect the wheel rate since the spring
has no idea it is at an angle?
Bill

On Thu, 8 Jan 2004 17:20:09 -0800 "John Wilkins" <john@race-dogs.com>
writes:
> Don't forget about the angle the Spring is being installed at. 
> Spitfire Frt.
> springs are appx. 45 degree which affects the Spring rate 
> substantially.
> Don't know much about the TVR.
> 
> John Wilkins
> "66 Triumph Spitfire #892
> 
> ----- Original Message ----- 
> From: "John Price" <jprice1@txcyber.com>
> To: "William G Rosenbach" <wgrosenbach@juno.com>; "Friends of 
> Triumph"
> <fot@autox.team.net>
> Sent: Thursday, January 08, 2004 12:41 PM
> Subject: Re: Spring Rates
> 
> 
> > No, it was not a trick question. It's what's on my TVR.
> >
> > ----- Original Message ----- 
> > From: "William G Rosenbach" <wgrosenbach@juno.com>
> > To: <jprice1@txcyber.com>
> > Sent: Thursday, January 08, 2004 1:36 PM
> > Subject: Re: Spring Rates
> >
> >
> > > John,
> > > The force to compress the spring continues to rise as the spring 
> is
> being
> > > compressed. The 130#/in spring at 13" free should produce a 
> seat
> pressure
> > > of 130# when fitted at 12". It will take 130# of force to begin 
> to
> > > compress from the 1" of compression as fitted, assuming there is 
> no
> other
> > > friction added in the fitment. if you need an inch more 
> compression to
> > > clear the locking device, that should total 260#.
> > > Was this a trick question that I missed a detail in?
> > > Bill
> > > 70 GT-6+
> > >
> > > 
> ________________________________________________________________
> > > The best thing to hit the internet in years - Juno SpeedBand!
> > > Surf the web up to FIVE TIMES FASTER!
> > > Only $14.95/ month - visit www.juno.com to sign up today!

<Prev in Thread] Current Thread [Next in Thread>