fot
[Top] [All Lists]

Re: Tire Size

To: "Craig Wensley" <wensley@adelphia.net>, "Bill Babcock"
Subject: Re: Tire Size
From: "BOB KRAMER" <rkramer3@austin.rr.com>
Date: Mon, 8 Nov 2004 07:19:41 -0600
I doubt Hoosier will stop making the 5:50-15. Since so many of the TR, AH, 
356 and MGA's have few tire choices they sell plenty of them. Based on my 
experience lately I think they've softened up the compound a little to make 
them wear out faster, thus increasing inventory turns and profits.  Must be 
another one of those right wing conspiracies! I put a new set on this past 
weekend and ran 2 hours and 15 minutes total, flogging and drifting the car 
as hard as I've ever have) and the tires show the wear. The left front is 
toast. It takes the hardest beating at  TWS. The last race was an hour 
enduro and there was no chance to save it by rotating it to the rear. Do 
they sell stock in Hoosier?

Bob Kramer
rkramer3@austin.rr.com
----- Original Message ----- 
From: "Craig Wensley" <wensley@adelphia.net>
To: "Bill Babcock" <BillB@bnj.com>
Cc: "'Joe Siam'" <jsiam1@earthlink.net>; "FOT (E-mail)" <fot@Autox.Team.Net>
Sent: Monday, November 08, 2004 6:35 AM
Subject: Re: Tire Size


> Bill Babcock wrote:
>
>>Most use the 5.50 X 15 Hoosier TD. Your sanctioning body my have specific
>>requirements (such as HMSA, which requires Dunlop L racing tires 5.50 X 
>>15)
>>and you should check with the folks you plan to run with before you buy
>>tires you can't use. Most vintage racing groups require at least 60 series
>>tires, and many require 70 series.
>>-----Original Message-----
>>From: owner-fot@Autox.Team.Net [mailto:owner-fot@Autox.Team.Net] On Behalf
>>Of Joe Siam
>>Sent: Sunday, November 07, 2004 9:16 AM
>>To: FOT (E-mail)
>>Subject: Tire Size
>>
>>Sorry to email again  What is the tire make and size everyone is using for
>>vintage racing a TR4
>>
>>            Thanks  Joe
>>
>>
> What happen when all the tire manufactures stop building the high profile?
>
> Like Hoosier has already stop building there street tires.
>
> The manufactures cant make any money from high profile.
>
> Looks to me that you guys will have to get the them (HMSA, SVRA, VSCDA, 
> HSR and so on) to change the rules on tire size
>
> Craig 

<Prev in Thread] Current Thread [Next in Thread>