fot
[Top] [All Lists]

RE: Mallory dual point dizzy now Lucas slam

To: "'Bill Babcock'" <BillB@bnj.com>, <Fubog1@aol.com>, <N197TR4@cs.com>,
Subject: RE: Mallory dual point dizzy now Lucas slam
From: "Richard Taylor" <tarch@bellsouth.net>
Date: Thu, 2 Jun 2005 20:48:52 -0400
Come on, Bill.
You're holding back again. If you don't like something, just come out and
say it. We don't need no sugar-coatin'.
Richard

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Bill Babcock
Sent: Thursday, June 02, 2005 8:02 PM
To: 'Fubog1@aol.com '; 'N197TR4@cs.com '; 'hottr6@hotmail.com '
Cc: 'fot@autox.team.net '
Subject: RE: Mallory dual point dizzy now Lucas slam

 That's crazy talk, You guys are scaring me.

I find four things consistently wrong with lucal distributors.

1. Manufacturing tolerances, design and materials of the bushings--too
loose, too short, and too soft. 

2. Ditto for the shaft. Too skinny, too soft, not very straight. 

3. Goofy point plate design--even the ones made for no vacuum advance have
the wobbly vacuum advance plate--it's just pinned loosly in place. 

4. Distributor cover--the plastic is too thin, especially near the clips.
Look at almost any Lucas Disty that has a good coil and you'll find a little
carbon spot on the inside of the distributor cap near the clip. Guess what
makes that spot. Is you don't have the spot your coil is probably weak.

If you use a good, modern timing light on a Lucas distributor the timing
mark routinely jumps. You can still set the timing because most of the time
it's in the same spot. Put a timing light on a good distributor with
electronic ignition and it's solid--no jumping at all. That's got to be a
good thing. 

I tried, I really tried. I wanted to use the lucas because it looks correct.
What I would up with is a big box of lucas parts, alternate bushigs,
electronic bits, and workarounds, and about five pieces of quality catapult
ammo

-----Original Message-----
From: Fubog1@aol.com
To: N197TR4@cs.com; hottr6@hotmail.com; Bill Babcock
Cc: fot@autox.team.net
Sent: 6/2/2005 10:06 AM
Subject: Re: Mallory dual point dizzy now Lucas slam

In a message dated 6/2/2005 12:47:05 PM Eastern Daylight Time,
N197TR4@cs.com writes:

I really like my Lucas Distributor with Allison/Crane electronics.


Not a thing wrong with that system. 
Safety FasTR,
Glen
regular user of Lucas, Borg & Beck clutches, stock rocker assemblies
&....... lastly....the occasional Stromberg carburetor as well...

<Prev in Thread] Current Thread [Next in Thread>