for sale
1.5:1 ratio harland sharp roller rockers. The old style, with needle bearings
(not bushings) for the shaft and roller tips. One or two them have been
nicked up, but they have been filed down and are still perfectly useable.
They probably have about 10 races on them. Switching to the new limited prep
formula that doesn't allow roller rockers so they are just taking up space now.
$275 for the rockers plus shipping
$300 for the rockers and hardened shaft plus shipping
$325 for the whole assembly with the teflon spacers (not so pretty, but work
excellent) and pedestals (stock but polished). plus shipping
pictures available on request.
I also have a nice 1.5" carb setup not thru bored...rebuilt with new shafts
that have been thinned, solid butterflies riveted and soldered in place,
vacuum holes epoxied shut, AN fittings on float tops, with quiller triumph
heat shield, #4 needles and .100" jets, .5" phenolic spacers between the
carbs/manifold, winner's circle short ram pipes, and a ported manifold (that
probably still needs flow bench work)...not cheap...email if you're
interested. Same deal, new limited prep formula means I go to a single carb...
--
All the best
Aaron Johnson
#87 HP Spitfire 1500
Southern Illinois Region SCCA
hpspitfire.serverbeer.com
|