fot
[Top] [All Lists]

RE: British Frame & engine Uprated Axles

To: "'DennisR380@aol.com'" <DennisR380@aol.com>, fot@autox.team.net
Subject: RE: British Frame & engine Uprated Axles
From: Bill Babcock <BillB@bnj.com>
Date: Thu, 8 Sep 2005 09:03:43 -0700
yes 

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of DennisR380@aol.com
Sent: Thursday, September 08, 2005 7:42 AM
To: fot@autox.team.net
Subject: Re: British Frame & engine Uprated Axles

In a message dated 9/8/05 6:36:50 AM, BillB@bnj.com writes:

<< I'm also using this kit and didn't like the thin shims. I haven't had any
problem because I elected not to use them. Instead I used the thickest shim
and dressed the end of the spacer to get the proper clearance. I also
decided to set them up at roughly five thousandths for no particularly good
reason. I like the parts a lot--they solve the problem and make me feel much
more confident in the front wheels staying attached.  At least I assume I'm
using the same kit--I suspect Ken got them from the machinist (forgot his
name) that developed them in the FOT.  >>

Bill, are you referring to Mark Weathers front axle upgrade kit?

<Prev in Thread] Current Thread [Next in Thread>