Re: [FOT] TR6 alternative pistons

To:	Roadandtrack2@hypermax.net.au, ryoung@navcomtech.com,
Subject:	Re: [FOT] TR6 alternative pistons
From:	Gt6steve@aol.com
Date:	Wed, 15 Mar 2006 18:25:52 EST

Hi Terry,
I'm not seeing why the buttons have to have a radiused head.  If they were 
flat and didn't extend beyond the piston there would be minimal contact with 
the 
edges as the pin moved.  Is that too concentrated a load for the material to 
deal with?

Thanx for starting this interesting thread!  Steve Smith

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [FOT] TR6 alternative pistons, (continued) Re: [FOT] TR6 alternative pistons, Bob Davis RE: [FOT] TR6 alternative pistons, Randall RE: [FOT] TR6 alternative pistons, Randall RE: [FOT] TR6 alternative pistons, Bill Babcock RE: [FOT] TR6 alternative pistons, barry rosenberg [FOT] TR6 alternative pistons, jrhill Re: [FOT] TR6 alternative pistons, WEmery7451 Re: [FOT] TR6 alternative pistons, Kas Kastner RE: [FOT] TR6 alternative pistons, Jeffery Senty RE: [FOT] TR6 alternative pistons, Terry and Cindy Re: [FOT] TR6 alternative pistons, Gt6steve <= Re: [FOT] TR6 alternative pistons, RCline369 RE: [FOT] TR6 alternative pistons, Terry and Cindy Re: [FOT] TR6 alternative pistons, rob

Previous by Date:	[FOT] buttons..., MDunst / Gasket Works USA
Next by Date:	Re: [FOT] Sabrina twin-cam, N197TR4
Previous by Thread:	RE: [FOT] TR6 alternative pistons, Terry and Cindy
Next by Thread:	Re: [FOT] TR6 alternative pistons, RCline369
Indexes:	[Date] [Thread] [Top] [All Lists]