In a message dated 5/29/06 9:00:18 PM Pacific Daylight Time,
<< Is this cam available for sale anymore or just copy the spec yourself
In the olden days, I started with a real Kastner D cam. I then acquired a
real Kastner F cam, and finally bought a real Kastner G-3 cam from someone at
Nelson Ledges. The G-3 cam was the best cam that I ever had, but it finally
blown to bits. I went back to the F cam, but it soon got destroyed. Every
other cam that I have used were regrinds.
Kas referred me to Bill Jenks of Moon Eye, who had ground all of the Kastner
cams. I had Bill grind a cam for me, and he did a very good job. The base
circle is still smaller than the originals since it is a regrind.
For some reason, Kas's G-3 cam seemed to have more lift than any cams I ever
had. The valve springs were bottoming out, and I went to small block Chevy